[Pluto-help] Anti Aliasing sotto KDE 2.1.1 : veramente di cuore: AIUTO!
Lorenzo
apumark a tin.it
Dom 24 Giu 2001 19:11:34 CEST
Salute a tutti i carissimi pinguini appassionati..;-)
Sono di nuovo tra voi per sottopoprre un problema che non trova soluzione:
gli anti aliased fonts sotto kde 2.1.
Questo č quello che ho: RH 6.1 con kernel 2.4.5 e XFree 4.1.0
La versione di KDE che ho installato č la 2.1.1 e ho prelevato gli rpm da un
mirror di kde ; fra i vari rpm vi era anche qt versione 2.3.0.
Ho installato il tutto senza alcun problema.
Allora non riesco a far partire 'sti benedetti AA fonts. Mi sono scaricato
dei TT fonts che sembrano "compatibili" con l'anti-aliasing e poi mi sono
scaricato anche un file Xftconfig che dovrebbe andare bene...non ricordo da
dove..ma il tutto sembra piuttosto gettonato quanto a funzionalitą...( un
sacco di link e richiami ). Sgombriamo il campo da dubbi:
- l'extension RENDER parte con X
- libfreetype parte con X ( le librerie sono quelle di X binario che si
scarica ) Fra l'altro temendo conflitti ho disinstallato una versione
precompilata di freetype2 della Ximian. :-P. Le librerie ( libfreetype.so.6
etc) sono in /usr/X11R6/lib/
- c'č un file XftConfig in /usr/X11R6/lib/X11 ed un link a questo file in
/etc/X11
- qt "dovrebbe" essere "anti-aliased enabled": nel control center c'č la
casellina dove uno seleziona l'uso degli antialised ed ho letto in un
tutorial trovato in linuxplanet che č quanto basta per sapere che i qt sono
stati compilati con il supporto anti aliased. ( ovviamente la caselina l'ho
selezionata ma niente funzia..:-P )
- ho provato a non far partire xfs al boot ma č lo stesso
- le directory a cui punta XftConfig č viva e vegeta: contiene i TT fonts e i
file fonts.dir e fonts.scale
- ho provato a compilare per conto mio qt con le varie opzioni del caso ma mi
da' un errore in merito al mio compilatore....
E' tutto per il momento..:-P...gli allegati sono per pignoleria e per avere
"sotto mano il mio sistema"..
Beh..grazie e un cero a tutti coloro che mi sgarbugliano questo casino!!
Ciao Lorenzo
-------------- parte successiva --------------
#
# XftConfig
#
# Use with Type1 and TrueType fonts
#
dir "/usr/X11R6/lib/X11/fonts/Type1"
dir "/usr/X11R6/lib/X11/fonts/TrueType"
#
# alias 'fixed' for 'mono'
#
match any family == "fixed" edit family =+ "mono";
#
#Check users config file
#
includeif "~/.xftconfig"
#
# Substitute TrueType fonts for Type1 versions
#
match any family == "Times" edit family += "Times New Roman";
match any family == "Helvetica" edit family += "Verdana";
match any family == "Courier" edit family += "Courier New";
#
# Use TrueType fonts for defaults
#
match any family == "serif" edit family += "Times New Roman";
match any family == "sans" edit family += "Verdana";
#
# Use monotype.com (andale) face where possible
#
match
any family == "mono"
all slant == roman
all weight < bold
edit
family += "monotype.com";
#
# otherwise, use courier
#
match any family == "mono" edit family += "Courier New";
#
# Alias between XLFD families and font file family name, prefer local fonts
#
match any family == "Charter" edit family += "Bitstream Charter";
match any family == "Bitstream Charter" edit family =+ "Charter";
match any family == "Lucidux Serif" edit family += "LuciduxSerif";
match any family == "LuciduxSerif" edit family =+ "Lucidux Serif";
match any family == "Lucidux Sans" edit family += "LuciduxSans";
match any family == "LuciduxSans" edit family =+ "Lucidux Sans";
match any family == "Lucidux Mono" edit family += "LuciduxMono";
match any family == "LuciduxMono" edit family =+ "Lucidux Mono";
#
# TrueType font aliases
#
match any family == "Comic Sans" edit family += "Comic Sans MS";
match any family == "Comic Sans MS" edit family =+ "Comic Sans";
match any family == "Trebuchet" edit family += "Trebuchet MS";
match any family == "Trebuchet MS" edit family =+ "Trebuchet";
match any family == "Monotype" edit family =+ "Monotype.com";
match any family == "Andale Mono" edit family += "Monotype.com";
match any family == "Monotype.com" edit family =+ "Andale Mono";
-------------- parte successiva --------------
# File generated by xf86config.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# SubSection "extmod"
# Option "omit xfree86-dga" # don't initialise the DGA extension
# EndSubSection
Load "extmod"
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx"
Load "dri"
EndSection
Section "DRI"
Mode 0666
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#
FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/TrueType"
# The module search path. The default path is shown here.
ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 5"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
Option "LeftAlt" "Meta"
Option "RightAlt" "Meta"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "it"
Option "XkbCompat" ""
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "Buttons" "5"
Option "ZAxisMapping" "4 5"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Philips105s"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 30-60
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-120
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
# Section "Device"
# Identifier "Standard VGA"
# VendorName "Unknown"
# BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
# EndSection
# Device configured by xf86config:
Section "Device"
Identifier "MatroxG400"
Driver "mga"
BusID "PCI:1:0:0"
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "MatroxG400"
Monitor "Philips105s"
DefaultDepth 16
Subsection "Display"
Depth 8
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes "800x600"
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "640x480" "800x600" "1024x768" "1280x1024"
ViewPort 0 0
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
-------------- parte successiva --------------
XFree86 Version 4.1.0 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 2 June 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.5 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Sun Jun 24 13:36:31 2001
(==) Using config file: "/etc/X11/XF86Config"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "Philips105s"
(**) | |-->Device "MatroxG400"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 5"
(WW) Option "XkbCompat" requires an string value
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc101"
(**) XKB: model: "pc101"
(**) Option "XkbLayout" "it"
(**) XKB: layout: "it"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/,/usr/X11R6/lib/X11/fonts/TrueType"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7
(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.4
XFree86 XInput driver : 0.2
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80000060, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0691 card 0000,0000 rev c4 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,0686 card 1106,0000 rev 22 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 1106,0571 card 0000,0000 rev 10 class 01,01,8a hdr 00
(II) PCI: 00:07:2: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 hdr 00
(II) PCI: 00:07:4: chip 1106,3057 card 0000,0000 rev 30 class 06,00,00 hdr 00
(II) PCI: 00:0a:0: chip 1102,0002 card 1102,8027 rev 07 class 04,01,00 hdr 80
(II) PCI: 00:0a:1: chip 1102,7002 card 1102,0020 rev 07 class 09,80,00 hdr 80
(II) PCI: 01:00:0: chip 102b,0525 card 102b,0338 rev 04 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) Host-to-PCI bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
(II) Bus 1 I/O range:
(II) Bus 1 non-prefetchable memory range:
[0] -1 0xd4000000 - 0xd7ffffff (0x4000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0xd8000000 - 0xd9ffffff (0x2000000) MX[B]
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(II) Bus -1: bridge is at (0:0:0), (-1,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
(--) PCI:*(1:0:0) Matrox MGA G400 AGP rev 4, Mem @ 0xd8000000/25, 0xd4000000/14, 0xd5000000/23
(II) Addressable bus resource ranges are
[0] -1 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[1] -1 0xd5000000 - 0xd57fffff (0x800000) MX[B](B)
[2] -1 0xd4000000 - 0xd4003fff (0x4000) MX[B](B)
[3] -1 0xd8000000 - 0xd9ffffff (0x2000000) MX[B](B)
[4] -1 0x0000e400 - 0x0000e407 (0x8) IX[B]
[5] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
[6] -1 0x0000d800 - 0x0000d81f (0x20) IX[B]
[7] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[8] -1 0x0000d000 - 0x0000d00f (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[1] -1 0xd5000000 - 0xd57fffff (0x800000) MX[B](B)
[2] -1 0xd4000000 - 0xd4003fff (0x4000) MX[B](B)
[3] -1 0xd8000000 - 0xd9ffffff (0x2000000) MX[B](B)
[4] -1 0x0000e400 - 0x0000e407 (0x8) IX[B]
[5] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
[6] -1 0x0000d800 - 0x0000d81f (0x20) IX[B]
[7] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[8] -1 0x0000d000 - 0x0000d00f (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[6] -1 0xd5000000 - 0xd57fffff (0x800000) MX[B](B)
[7] -1 0xd4000000 - 0xd4003fff (0x4000) MX[B](B)
[8] -1 0xd8000000 - 0xd9ffffff (0x2000000) MX[B](B)
[9] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0x0000e400 - 0x0000e407 (0x8) IX[B]
[12] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
[13] -1 0x0000d800 - 0x0000d81f (0x20) IX[B]
[14] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[15] -1 0x0000d000 - 0x0000d00f (0x10) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.1.9
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "mga"
(II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o
(II) Module mga: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.2
(II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w,
mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400
(II) Primary Device is: PCI 01:00:0
(--) Chipset mgag400 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[6] -1 0xd5000000 - 0xd57fffff (0x800000) MX[B](B)
[7] -1 0xd4000000 - 0xd4003fff (0x4000) MX[B](B)
[8] -1 0xd8000000 - 0xd9ffffff (0x2000000) MX[B](B)
[9] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[10] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[11] -1 0x0000e400 - 0x0000e407 (0x8) IX[B]
[12] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
[13] -1 0x0000d800 - 0x0000d81f (0x20) IX[B]
[14] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[15] -1 0x0000d000 - 0x0000d00f (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[6] -1 0xd5000000 - 0xd57fffff (0x800000) MX[B](B)
[7] -1 0xd4000000 - 0xd4003fff (0x4000) MX[B](B)
[8] -1 0xd8000000 - 0xd9ffffff (0x2000000) MX[B](B)
[9] 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[10] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[11] 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0x0000e400 - 0x0000e407 (0x8) IX[B]
[15] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
[16] -1 0x0000d800 - 0x0000d81f (0x20) IX[B]
[17] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[18] -1 0x0000d000 - 0x0000d00f (0x10) IX[B]
[19] 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[20] 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(**) MGA(0): Depth 16, (--) framebuffer bpp 16
(==) MGA(0): RGB weight 565
(II) Loading sub module "mga_hal"
(II) LoadModule: "mga_hal"
(WW) Warning, couldn't open module mga_hal
(II) UnloadModule: "mga_hal"
(EE) MGA: Failed to load module "mga_hal" (module does not exist, 0)
(II) MGA(0): Matrox HAL module not found - using builtin mode setup instead
(--) MGA(0): Chipset: "mgag400"
(==) MGA(0): Using AGP 1x mode
(--) MGA(0): Linear framebuffer at 0xD8000000
(--) MGA(0): MMIO registers at 0xD4000000
(--) MGA(0): Pseudo-DMA transfer window at 0xD5000000
(==) MGA(0): BIOS at 0xC0000
(--) MGA(0): Video BIOS info block at offset 0x07A80
(WW) MGA(0): Video BIOS info block not detected!
(II) MGA(0): MGABios.RamdacType = 0x0
(==) MGA(0): Write-combining range (0xd8000000,0x2000000)
(--) MGA(0): VideoRAM: 16384 kByte
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.4
(==) MGA(0): Write-combining range (0xd8000000,0x1000000)
(II) MGA(0): I2C bus "DDC" initialized.
(II) MGA(0): I2C device "DDC:ddc2" registered.
(II) MGA(0): I2C device "DDC:ddc2" removed.
(II) MGA(0): I2C Monitor info: (nil)
(II) MGA(0): end of I2C Monitor info
(--) MGA(0): No DDC signal
(II) MGA(0): DDC Monitor info: (nil)
(II) MGA(0): end of DDC Monitor info
(==) MGA(0): Using gamma correction (1.0, 1.0, 1.0)
(==) MGA(0): Min pixel clock is 12 MHz
(==) MGA(0): Max pixel clock is 300 MHz
(II) MGA(0): Philips105s: Using hsync range of 30.00-60.00 kHz
(II) MGA(0): Philips105s: Using vrefresh range of 50.00-120.00 Hz
(II) MGA(0): Clock range: 12.00 to 300.00 MHz
(II) MGA(0): Not using default mode "1024x768" (hsync out of range)
(II) MGA(0): Not using default mode "1152x864" (hsync out of range)
(II) MGA(0): Not using default mode "1280x960" (hsync out of range)
(II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
(II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
(II) MGA(0): Not using default mode "1280x1024" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "1600x1200" (hsync out of range)
(II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
(II) MGA(0): Not using default mode "1792x1344" (hsync out of range)
(II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
(II) MGA(0): Not using default mode "1856x1392" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
(II) MGA(0): Not using default mode "1920x1440" (hsync out of range)
(II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
(II) MGA(0): Not using default mode "1400x1050" (hsync out of range)
(--) MGA(0): Has SDRAM
(--) MGA(0): Virtual size is 800x600 (pitch 800)
(**) MGA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) MGA(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604 631 +hsync +vsync
(==) MGA(0): DPI set to (75, 75)
(II) MGA(0): YDstOrg is set to 0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.1.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
Symbol vbeFree from module /usr/X11R6/lib/modules/drivers/mga_drv.o is unresolved!
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0xd5000000 - 0xd57fffff (0x800000) MX[B]
[1] 0 0xd4000000 - 0xd4003fff (0x4000) MX[B]
[2] 0 0xd8000000 - 0xd9ffffff (0x2000000) MX[B]
[3] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[4] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[5] -1 0x000f0000 - 0x000fffff (0x10000) MX[B]
[6] -1 0x000c0000 - 0x000effff (0x30000) MX[B]
[7] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[8] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
[9] -1 0xd5000000 - 0xd57fffff (0x800000) MX[B](B)
[10] -1 0xd4000000 - 0xd4003fff (0x4000) MX[B](B)
[11] -1 0xd8000000 - 0xd9ffffff (0x2000000) MX[B](B)
[12] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[13] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[14] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0x0000e400 - 0x0000e407 (0x8) IX[B]
[18] -1 0x0000e000 - 0x0000e01f (0x20) IX[B]
[19] -1 0x0000d800 - 0x0000d81f (0x20) IX[B]
[20] -1 0x0000d400 - 0x0000d41f (0x20) IX[B]
[21] -1 0x0000d000 - 0x0000d00f (0x10) IX[B]
[22] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[23] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) MGA(0): Write-combining range (0xd8000000,0x1000000)
(--) MGA(0): 16 DWORD fifo
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): [drm] bpp: 16 depth: 16
(II) MGA(0): [drm] Sarea 2200+664: 2864
(II) MGA(0): [drm] loaded kernel module "mga"
(II) MGA(0): [drm] created "mga" driver at busid "PCI:1:0:0"
(II) MGA(0): [drm] added 4096 byte SAREA at 0xc884f000
(II) MGA(0): [drm] mapped SAREA 0xc884f000 to 0x40019000
(II) MGA(0): [drm] framebuffer handle = 0xd8000000
(II) MGA(0): [drm] added 1 reserved context for kernel
(II) MGA(0): [agp] Mode 0x1f000211 [AGP 0x1106/0x0691; Card 0x102b/0x0525]
(II) MGA(0): [agp] 12288 kB allocated with handle 0xc9852000
(II) MGA(0): [agp] WARP microcode handle = 0xd0000000
(II) MGA(0): [agp] WARP microcode mapped at 0x4196a000
(II) MGA(0): [agp] Primary DMA handle = 0xd0008000
(II) MGA(0): [agp] Primary DMA mapped at 0x41972000
(II) MGA(0): [agp] DMA buffers handle = 0xd0108000
(II) MGA(0): [agp] DMA buffers mapped at 0x41a72000
(II) MGA(0): [drm] Added 128 65536 byte DMA buffers
(II) MGA(0): [drm] Registers handle = 0xd4000000
(II) MGA(0): [drm] Status handle = 0xc985b000
(II) MGA(0): [agp] Status page mapped at 0x4001a000
(II) MGA(0): [dri] visual configs initialized
(II) MGA(0): Memory manager initialized to (0,0) (800,1803)
(II) MGA(0): Largest offscreen area available: 800 x 1203
(II) MGA(0): Reserved back buffer at offset 0x2c1000
(II) MGA(0): Reserved depth buffer at offset 0x3ac000
(II) MGA(0): Reserved 11684 kb for textures at offset 0x497000
(II) MGA(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid filled trapezoids
8x8 mono pattern filled rectangles
8x8 mono pattern filled trapezoids
Indirect CPU to Screen color expansion
Screen to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
30 128x128 slots
6 256x256 slots
(==) MGA(0): Backing store disabled
(==) MGA(0): Silken mouse enabled
(II) MGA(0): Using overlay video
(II) MGA(0): X context handle = 0x00000001
(II) MGA(0): [drm] installed DRM signal handler
(II) MGA(0): [DRI] installation complete
(II) MGA(0): [drm] Mapped 128 DMA buffers
(==) MGA(0): Direct rendering enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Option "Buttons" "5"
(**) Mouse1: Buttons: 5
(**) Option "Emulate3Buttons"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
(II) MGA(0): [drm] removed 1 reserved context for kernel
(II) MGA(0): [drm] unmapping 4096 bytes of SAREA 0xc884f000 at 0x40019000
(II) Open APM successful
(==) MGA(0): Write-combining range (0xd8000000,0x1000000)
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): [drm] bpp: 16 depth: 16
(II) MGA(0): [drm] Sarea 2200+664: 2864
(II) MGA(0): [drm] created "mga" driver at busid "PCI:1:0:0"
(II) MGA(0): [drm] added 4096 byte SAREA at 0xc884f000
(II) MGA(0): [drm] mapped SAREA 0xc884f000 to 0x40019000
(II) MGA(0): [drm] framebuffer handle = 0xd8000000
(II) MGA(0): [drm] added 1 reserved context for kernel
(II) MGA(0): [agp] Mode 0x1f000211 [AGP 0x1106/0x0691; Card 0x102b/0x0525]
(II) MGA(0): [agp] 12288 kB allocated with handle 0xc9852000
(II) MGA(0): [agp] WARP microcode handle = 0xd0000000
(II) MGA(0): [agp] WARP microcode mapped at 0x4196a000
(II) MGA(0): [agp] Primary DMA handle = 0xd0008000
(II) MGA(0): [agp] Primary DMA mapped at 0x41972000
(II) MGA(0): [agp] DMA buffers handle = 0xd0108000
(II) MGA(0): [agp] DMA buffers mapped at 0x41a72000
(II) MGA(0): [drm] Added 128 65536 byte DMA buffers
(II) MGA(0): [drm] Registers handle = 0xd4000000
(II) MGA(0): [drm] Status handle = 0xc985b000
(II) MGA(0): [agp] Status page mapped at 0x4001a000
(II) MGA(0): [dri] visual configs initialized
(II) MGA(0): Memory manager initialized to (0,0) (800,1803)
(II) MGA(0): Largest offscreen area available: 800 x 1203
(II) MGA(0): Reserved back buffer at offset 0x2c1000
(II) MGA(0): Reserved depth buffer at offset 0x3ac000
(II) MGA(0): Reserved 11684 kb for textures at offset 0x497000
(II) MGA(0): Using overlay video
(II) MGA(0): X context handle = 0x00000001
(II) MGA(0): [drm] installed DRM signal handler
(II) MGA(0): [DRI] installation complete
(II) MGA(0): [drm] Mapped 128 DMA buffers
(==) MGA(0): Direct rendering enabled
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
SetKbdSettings - type: 0 rate: 112 delay: 169 snumlk: 0
SetKbdSettings - Succeeded
GetModeLine - scrn: 0 clock: 56300
GetModeLine - hdsp: 800 hbeg: 832 hend: 896 httl: 1048
vdsp: 600 vbeg: 601 vend: 604 vttl: 631 flags: 5
(II) MGA(0): [drm] removed 1 reserved context for kernel
(II) MGA(0): [drm] unmapping 4096 bytes of SAREA 0xc884f000 at 0x40019000
(II) Open APM successful
(==) MGA(0): Write-combining range (0xd8000000,0x1000000)
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): [drm] bpp: 16 depth: 16
(II) MGA(0): [drm] Sarea 2200+664: 2864
(II) MGA(0): [drm] created "mga" driver at busid "PCI:1:0:0"
(II) MGA(0): [drm] added 4096 byte SAREA at 0xc884f000
(II) MGA(0): [drm] mapped SAREA 0xc884f000 to 0x40019000
(II) MGA(0): [drm] framebuffer handle = 0xd8000000
(II) MGA(0): [drm] added 1 reserved context for kernel
(II) MGA(0): [agp] Mode 0x1f000211 [AGP 0x1106/0x0691; Card 0x102b/0x0525]
(II) MGA(0): [agp] 12288 kB allocated with handle 0xc9852000
(II) MGA(0): [agp] WARP microcode handle = 0xd0000000
(II) MGA(0): [agp] WARP microcode mapped at 0x4196a000
(II) MGA(0): [agp] Primary DMA handle = 0xd0008000
(II) MGA(0): [agp] Primary DMA mapped at 0x41972000
(II) MGA(0): [agp] DMA buffers handle = 0xd0108000
(II) MGA(0): [agp] DMA buffers mapped at 0x41a72000
(II) MGA(0): [drm] Added 128 65536 byte DMA buffers
(II) MGA(0): [drm] Registers handle = 0xd4000000
(II) MGA(0): [drm] Status handle = 0xc985b000
(II) MGA(0): [agp] Status page mapped at 0x4001a000
(II) MGA(0): [dri] visual configs initialized
(II) MGA(0): Memory manager initialized to (0,0) (800,1803)
(II) MGA(0): Largest offscreen area available: 800 x 1203
(II) MGA(0): Reserved back buffer at offset 0x2c1000
(II) MGA(0): Reserved depth buffer at offset 0x3ac000
(II) MGA(0): Reserved 11684 kb for textures at offset 0x497000
(II) MGA(0): Using overlay video
(II) MGA(0): X context handle = 0x00000001
(II) MGA(0): [drm] installed DRM signal handler
(II) MGA(0): [DRI] installation complete
(II) MGA(0): [drm] Mapped 128 DMA buffers
(==) MGA(0): Direct rendering enabled
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
(II) MGA(0): [drm] removed 1 reserved context for kernel
(II) MGA(0): [drm] unmapping 4096 bytes of SAREA 0xc884f000 at 0x40019000
(II) Open APM successful
(==) MGA(0): Write-combining range (0xd8000000,0x1000000)
(==) MGA(0): Default visual is TrueColor
(II) MGA(0): [drm] bpp: 16 depth: 16
(II) MGA(0): [drm] Sarea 2200+664: 2864
(II) MGA(0): [drm] created "mga" driver at busid "PCI:1:0:0"
(II) MGA(0): [drm] added 4096 byte SAREA at 0xc884f000
(II) MGA(0): [drm] mapped SAREA 0xc884f000 to 0x40019000
(II) MGA(0): [drm] framebuffer handle = 0xd8000000
(II) MGA(0): [drm] added 1 reserved context for kernel
(II) MGA(0): [agp] Mode 0x1f000211 [AGP 0x1106/0x0691; Card 0x102b/0x0525]
(II) MGA(0): [agp] 12288 kB allocated with handle 0xc9852000
(II) MGA(0): [agp] WARP microcode handle = 0xd0000000
(II) MGA(0): [agp] WARP microcode mapped at 0x4196a000
(II) MGA(0): [agp] Primary DMA handle = 0xd0008000
(II) MGA(0): [agp] Primary DMA mapped at 0x41972000
(II) MGA(0): [agp] DMA buffers handle = 0xd0108000
(II) MGA(0): [agp] DMA buffers mapped at 0x41a72000
(II) MGA(0): [drm] Added 128 65536 byte DMA buffers
(II) MGA(0): [drm] Registers handle = 0xd4000000
(II) MGA(0): [drm] Status handle = 0xc985b000
(II) MGA(0): [agp] Status page mapped at 0x4001a000
(II) MGA(0): [dri] visual configs initialized
(II) MGA(0): Memory manager initialized to (0,0) (800,1803)
(II) MGA(0): Largest offscreen area available: 800 x 1203
(II) MGA(0): Reserved back buffer at offset 0x2c1000
(II) MGA(0): Reserved depth buffer at offset 0x3ac000
(II) MGA(0): Reserved 11684 kb for textures at offset 0x497000
(II) MGA(0): Using overlay video
(II) MGA(0): X context handle = 0x00000001
(II) MGA(0): [drm] installed DRM signal handler
(II) MGA(0): [DRI] installation complete
(II) MGA(0): [drm] Mapped 128 DMA buffers
(==) MGA(0): Direct rendering enabled
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
More information about the pluto-help
mailing list