[PLUTO-help] ISDN & Ipppd

[windfall]

On 14:08 Fri 27 Feb?, parsifal wrote:
Ciao,
se ti può essere utile io uso una configurazione di questo tipo:

ipppd.ippp0

name mioutente
noauth
#login
#user X

poi setta gli altri parametri riguardanti pap (es encryption etc..)

noipdefault
nohostroute
mtu 1500
ms-dns ipmiodns
ipcp-accept-local
ipcp-accept-remote
noipx

in /etc/ppp/pap-secret

#(none) *       password
"mioutente"        *       "miapassword"

prova a mandare l'output di isdnctrl list ippp0 per quanto riguarda gli
errori al boot...senza paratri personali però

> Ora quando attivo isdnutils all'avvio del sistema mi compare il seguente
> errore:
> 
> Starting ISDN services: interface isdn : verbose level 2
> Netmask: Hostname lookup failure
> SIOCSIFADDR : Invalid argument
> Ippp0 failed
> Ipppd ipppd : peer autentication required but no autentication files
> accessible or users server not found in auth files isdnlog.
> 
> Come faccio a far riconoscere il file /etc/ppp/pap-secrets che contiene
> login * password a ipppd ?
> Ho riletto i due file di configurazione più volte ma non riesco a capire
> , io ve li allego e spero qualcuno sappia darmi qualche dritta :
> 
> file : ipppd.ippp0
> 
> # Options file for ipppd.
> # ipppd will not read /etc/ppp/options or /etc/ppp/ioptions or any other
> # config file. Everything has to be in here.
> 
> # "peer" is the name for our syncppp partner.
> 
> # STANDARD OPTIONS
> 
> debug			# enable debugging
> -detach		# (no) fork to the background
> require-pap		# allow only pap authentication (dialin only)
> login			# use system password database for pap
> papcrypt		# pap passwords are encrypted
> -bsdcomp		# bsd compression on/off
> noccp			# compression negotation on/off
> nolzs			# LZS compression off (not yet supported fully)
> noipdefault		#  do not  use name for default ip addr
> defaultroute 		# (do not) set default route 
> mru 1524 		# (do not) set maximum size of receive units to
> X
> ipcp-accept-local	# Accept peer's address for us 
> ipcp-accept-remote	# Accept peer's address for it
> 
> Ho  tolto le opzioni che non ho abilitato.
> 
> # This is a very short summary with the important options.
> # for a longer descriptions of all options : please read isdnlog(8)
> 
> 
> [options]
> 
> #log=1 			# log d-channel messages. value may be 0-15 (bit
> coded flags)
> daemon=yes	      	# "yes"/"no": (dont) start isdnlog as daemon.
> Set yes for Debian
> stdout=0x3f7		# log to stdout and file, and set log level if
> you remove "outfile" option, also remove "stdout"
> # option!
> outfile=+/var/log/isdn/isdnlog	# logfile to log to ('+' is append mode)
> console=/dev/null			# where to send stdout text;
> e.g. /dev/tty12
> monitor=yes				# enable support for imon and
> imontty (monitor progs)
> syslog=0x1bf7			# log to syslog with log level X
> #thruput=60				# if you log thruput : one
> message every X seconds
> #time=2				# 1=get time from isdn one, 2=everytime 
> #hangup=5:3				# enable chargehup with 5 / 3
> seconds security gap
> #start=yes				# enable program start on events
> ciInterval=59   			# show the cost etc. every 60s
> 
> Inolre ho inserito in /etc/resolv.conf i paramtri dns del collegamento a
> libero.
> 
> Grazie dell'aiuto.
> 
> 
> 
> 
> _______________________________________________
> pluto-help mailing list
> pluto-help a lists.pluto.it
> http://lists.pluto.it/cgi-bin/mailman/listinfo/pluto-help