[PLUTO-help] Motorola c350 fa i capricci
Rodolfo Medina
rodolfo.medina a gmail.com
Mar 26 Dic 2006 12:33:06 CET
Saluti e buone feste a tutti.
Dopo aver correttamente configurato ppp (vedi:
http://forums.debian.net/viewtopic.php?t=5016
), il mio piccolo Motorola c350 si connetteva a internet una bellezza: sė, un
po' lento, ma a colpo sicuro rispetto, per esempio, al Nokia 6630 che a volte
fallisce la connessione in assenza di un'ottima copertura UMTS.
Ma ora improvvisamente... erano mesi che non usavo il Motorola ed era andato
sempre bene; ieri ho provato a connettermi e non va: ecco il log di
connessione: qualcuno sa spiegare il problema?
Grazie,
Rodolfo
-------------------------------------------------------------------------------
$ pon motorola
abort on (BUSY)
abort on (NO CARRIER)
abort on (VOICE)
abort on (NO DIALTONE)
abort on (NO DIAL TONE)
abort on (NO ANSWER)
abort on (DELAYED)
send (ATZ^M)
expect (OK)
ATZ^M^M
OK
-- got it
send (AT+CGDCONT=1,"IP","ibox.tim.it"^M)
expect (OK)
^M
AT+CGDCONT=1,"IP","ibox.tim.it"^M^M
OK
-- got it
send (AT+CGQREQ=1,2,4,3,6,31^M)
expect (OK)
^M
AT+CGQREQ=1,2,4,3,6,31^M^M
OK
-- got it
send (AT+CGQMIN=1,2,4,3,6,31^M)
expect (OK)
^M
AT+CGQMIN=1,2,4,3,6,31^M^M
OK
-- got it
send (AT+CGATT=1^M)
expect (OK)
^M
AT+CGATT=1^M^M
OK
-- got it
send (ATD*99#^M)
expect (CONNECT)
^M
ATD*99#^M^M
CONNECT
-- got it
send (^M)
Serial connection established.
using channel 2
Using interface ppp0
Connect: ppp0 <--> /dev/ttyACM0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x92b74c3f> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x92b74c3f> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0x55757> <pcomp> <accomp>]
No auth is possible
sent [LCP ConfRej id=0x1 <auth pap>]
rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <magic 0x5575e> <pcomp> <accomp>]
sent [LCP ConfAck id=0x2 <asyncmap 0x0> <magic 0x5575e> <pcomp> <accomp>]
sent [LCP EchoReq id=0x0 magic=0x92b74c3f]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [LCP EchoRep id=0x0 magic=0x55769]
rcvd [LCP ProtRej id=0x1 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]
Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]
sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [LCP TermReq id=0x3 05 00 00 0a 00 00 00 00 00 00]
LCP terminated by peer (^E^@^@^J^@^@^@^@^@^@)
sent [LCP TermAck id=0x3]
Modem hangup
Connection terminated.
-------------------------------------------------------------------------------
More information about the pluto-help
mailing list